Presentation parameter of the signal

The presentation parameters define the necessary, graphical parameter to display the signal at the Sensor-Signals window.

These parameter are available at the SPI-Bus-Configuration window or at the Signal-Collection window.

The parameters are predefined.

The sequence of the color for the signal lines (PlotLineColor) changes at each defined signal according to the settings of the color definition.

Sensor Signal			Predefined values
Offset	Offset of the signals with a value of the unit. This enables an optimal display of all signals at the presentation window.	Direct value input of the unit (standard LSB)	0
PlotfillMode	Kind of line presentation	Selection form the list	None
PlotLineColour	Colour of the line	Selection form the list	DeepPink
PlotLineStyle	Style of line	Selection form the list	Solid
PlotLineWidth	Width of line	Direct entry in pt,	1
PlotPointcolor	Colour of the value point	Selection form the list	DeepPink
PlotPointStyle	Kind of the value point	Selection form the list	None
PlotVisible	Selection wether the line resp. signal is displayed or not	True = Signal is visible False = Signal is hidden	True
Scale	Scale factor, which calculates the incoming measurement signal to the line value. Factor 1 means, that the input voltage of +/- 10 V is sampled directly. Factor 2 means, that the real input value was divided with 2 before injection. This allows the presentation of the real voltage relations out of the Simulyzer.	Direct value input as a factor.	1
TextDisplayFormat	Display format of the data value in the sensor data window.	Selection list: hex=hexadecimal dec=number phys=Physical value	hex
Unit	Free selectable description of the physical value, which is measured. The setting is used for the settings of the axes.	Direct input	LSB